Panasonic EY7430 Bedienungsanleitung Seite 14

EN
Model No: EY3732
Symbol
To reduce the risk of
injury, user must read and
understand instruction
For indoor use only.
WARNING
LED lights create heat whilst in
use.
Heat may be trapped and cause
an accident.
• Do not cover the LED
Flashlight with cloth or paper
during use.
• Do not touch the LED lights
during use or just after the
use as they become hot.
• Do not use any other battery
pack besides as shown in
the Specifications.
CAUTION
1. This LED Flashlight is not waterproof.
• Do not use it in damp or wet
locations.
• Do not expose it to rain or snow.
• Do not wash it in water.
• Keep it in a safe, dry, and clean
area when it is not in use.
2. The LED Flashlight automatically
goes off when the battery voltage
drops below a specified level.
3. Do not disassemble the LED Flashlight.
Servicing should be performed by an
authorized service center.
4. Do not throw the battery pack into a fire.
This can cause an explosion.
5. Do not look into the LED light and
do not allow the lights to contact the
eyes directly.
If the LED lights contact the eye
continuously, it may result in injuries
to the eyes.
6. The appliance is not a portable
luminaire for children usage.
7. Children shall not play with the appliance.
8. Do not place or use in location with
shock or vibration.
The unit could fall down and cause
an injury.
EY7530_7430_3732_0L32_02(Eng).indd
Meaning
manual.
- 14 -
14
I. OPERATION
How to use the LED Flashlight:
1. Attach the battery pack to the main unit.
2. Adjust head angle.
【 Fig.8 】
NOTE:
The torch head independently pivots
135° for maximum flexibility. Move the
head by manually adjusting to any
position within the 135° pivot range.
Do not force the head beyond the 135°
range.
3. Press the switch once to turn on the
LED Flashlight.
4. Press the switch once again to turn off
the LED light.
2014/08/18 15:40:53