Benning MM 11 Bedienungsanleitung Seite 30

Maximum resolution: 1 µA in 20 mA measuring range
7.5 Resistance measuring ranges (Switch setting: Ω)
Overload protection in the case of resistance measurements: 600 V
Meas. range Resolution
200 Ω
2 kΩ
20 kΩ
200 kΩ
2 MΩ
20 MΩ
200 MΩ
2 GΩ *
2
* The 2 GΩ measuring range has to be selected manually by means of the
2
key L (see item 5.1.1.4).
7.6 Resistance measurement range with reduced measuring voltage: 0.6 V,
(Switch setting: LVΩ, indication in display "LV")
Meas. range Resolution
2 kΩ
20 kΩ
200 kΩ
2 MΩ
20 MΩ
200 MΩ
7.7 Diode and continuity testing (Switch setting:
Overload protection: 600 V
The built-in buzzer sounds in the case of a resistance R less than 50 Ω.
Meas. range
7.8 Capacity ranges (Switch setting:
Largest display value: 4.000 Points
Conditions: Discharge capacitors and apply according to the specified polarity.
Meas. range
4 nF
40 nF
400 nF
4 µF
40 µF
400 µF
4 mF
40 mF
7.9 Frequency ranges (Switch setting: Hz)
Overload protection in the case of frequency measurements: 600 V
Minimum input frequency: 5 Hz
Meas. range Resolution
20 Hz 0,001 Hz
200 Hz 0,01 Hz
2 kHz 0,1 Hz
20 kHz
03/ 2011
500 Hz ~ 1 kHz ± (1.2 % of the measured value + 80 Digit)
1 kHz ~ 3 kHz ± (2.0 % of the measured value + 80 Digit)
10 mΩ ± (0.3 % of the measured value + 30 Digit)
100 mΩ ± (0.3 % of the measured value + 30 Digit)
1 Ω ± (0.3 % of the measured value + 30 Digit)
10 Ω ± (0.3 % of the measured value + 30 Digit)
100 Ω ± (0.3 % of the measured value + 30 Digit)
1 kΩ ± (5.0 % of the measured value + 50 Digit)
1 MΩ ± (5.0 % of the measured value + 20 Digit)
0,1 GΩ ± (5 % of the measured value + 8 Digit)
0,1 Ω ± (0.6 % of the measured value + 30 Digit)
1 Ω ± (0.6 % of the measured value + 30 Digit)
10 Ω ± (0.6 % of the measured value + 30 Digit)
100 Ω ± (0.6 % of the measured value + 30 Digit)
1 kΩ ± (7.0 % of the measured value + 50 Digit)
1 MΩ ± (7.0 % of the measured value + 20 Digit)
eff
Resolution
1 mV
Resolution
1 pF ± (1.5 % of the measured value + 10 Digit)
10 pF ± (1.5 % of the measured value + 10 Digit)
100 pF ± (0.9 % of the measured value + 5 Digit)
1 nF ± (0.9 % of the measured value + 5 Digit)
10 nF ± (1.2 % of the measured value + 5 Digit)
100 nF ± (1.2 % of the measured value + 5 Digit)
1 µF ± (1.5 % of the measured value + 5 Digit)
10 µF ± (1.5 % of the measured value + 5 Digit)
Meas. precision for 5 V
± (0.01 % of the measured value + 50 Digit)
± (0.01 % of the measured value + 10 Digit)
± (0.01 % of the measured value + 10 Digit)
1 Hz ± (0.01 % of the measured value + 10 Digit)
BENNING MM 11
Meas. precision
Meas. precision
Max. meas. current
1,1 mA
)
Meas. precision
eff
eff
Max. idling voltage
3,3 V
3,3 V
3,3 V
3,3 V
3,3 V
3,3 V
3,3 V
3,3 V
Max. idling voltage
0,6 V
0,6 V
0,6 V
0,6 V
0,6 V
0,6 V
, )
Max. idling voltage
3,3 V
Overload protection
600 V
600 V
600 V
600 V
600 V
600 V
600 V
600 V
eff
max. Min. sensitivity
0,5 V
0,5 V
0,5 V
0,5 V

eff
eff
eff
eff
eff
eff
eff
eff
SS
SS
SS
SS
24