Benning MM 11 Bedienungsanleitung Seite 22

Digital multimeter for
- Direct voltage measurements
- Alternating voltage measurements
- Direct current measurement
- Alternating current measurement
- Resistance measurements
- Diode test
- Continuity testing
- Capacity measurement
- Frequency measurement
- Pulse duty ratio measurement
- Temperature measurement
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING MM 11
9. Maintenance
10. Application of rubber protection frame
11. Technical data of the measuring accessories
12. Environmental note
1. User notes
These operating instructions are intended for
- skilled electricians and
- trained electronics personnel.
The BENNING MM 11 is intended for making measurements in dry environ-
ment. It must not be used in power circuits with a nominal voltage higher than
1000 V DC and 750 V AC (More details in Section 6. "Ambient conditions")
The following symbols are used in these operating instructions and on the
BENNING MM 11:
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!

The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This symbol on the BENNING MM 11 means that the

BENNING MM 11 is totally insulated (protection class II).
This symbol on the BENNING MM 11 indicates the built in fuses.
This symbol appears on the display to indicate a discharged battery.
This symbol designates the „diode test" range.
This symbol designates the „continuity test" range.
The buzzer is used for the acoustic result output.
This symbol designates the „capacity test" range.
(DC) Direct voltage or current.

(AC) Alternating voltage or current.

Ground (Voltage against ground).
03/ 2011
Operating instructions
BENNING MM 11
BENNING MM 11

16