Operation - Fm Radio; Tuning To Fm Channels Manually; Auto-Scanning For Fm Channels; Displaying Fm Service Information (Rds) - Renkforce 2633082 Bedienungsanleitung

3. Press the Select button to confirm a selection.
4. Press the Select button to confirm a setting.
11 Operation – FM radio

11.1 Tuning to FM channels manually

1. Press the Band button to select "FM radio mode".
2. Repeatedly press the Tuning up/down button to select the frequency that the
radio will tune to. The frequency will change in steps of 50 kHz.
If the end of the waveband is reached, the radio will restart tuning from the
Æ
opposite end of the waveband.

11.2 Auto-scanning for FM channels

1. Press the Band button to select "FM radio mode".
2. Press and hold the Tuning up/down button.
3. The radio will search in an upwards or downwards direction until it finds a station
of sufficient signal strength.
If the signal is strong enough and there is RDS data present then the radio
Æ
will display the station name.
If the end of the waveband is reached, the radio will restart tuning from the
Æ
opposite end of the waveband.

11.3 Displaying FM service information (RDS)

If a station/channel provides service information (RDS), the radio can display it,
including: radio text, program type, frequency, and audio type.
1. Repeatedly press the Info/Menu button to cycle through the information.
40