Getting Started - Therabody RecoveryAir JetBoots Bedienungsanleitung

RecoveryAir JetBoots
Integrated Pneumatic Compression System
Fully wireless compression boots.
Your RecoveryAir JetBoots come with two compression boots, each with integrated pumps.
Plus a 36W charger, a splitter charging cord, and a carrying pouch.

Getting started

1. To get started, put your boots on and get into a comfortable position.
2. Once ready, turn ON the RecoveryAir JetBoots integrated pump, by pressing the power button.
3. After your boots are ON and have automatically paired, you can adjust the pressure and time settings directly
from the integrated pumps before your treatment begins. More settings can be made from the Therabody app.
(If your boots are not automatically paired, see section Troubleshooting on page 8.)
4. Use your JetBoots at the same time as a pair or independently of each other.
Prepare your treatment
1. After turning on and pairing your RecoveryAir JetBoots, you are ready to choose your program settings.
2. Access two preset program options when connected to the Therabody app: Recover and Warm-up.
3. Once you have chosen your desired program, use the Pressure button to adjust the pressure setting.
4. Then, toggle through the time options using the Time button, to set your desired treatment time
(20min, 40min, 60min, or continuous).
5. Once you have selected the treatment options that are right for you, press start, relax, and you'll be on your
way to recovery in no time.
See Warnings on pg. 5 for
important safety instructions.
EN
2