Getting Started - Therabody RecoveryAir JetBoots Schnellstartanleitung

Getting started

1. To get started, put your boots on and get into a comfortable position.
2. Once ready, turn ON the RecoveryAir JetBoots integrated pump, by pressing the power button.
3. If your boots are not automatically paired, press the pressure and time buttons at the same time
and hold both for 5 seconds to enable the pairing of the two boots.
4. The pressure and time settings can be adjusted directly from the integrated pumps before your
treatment begins. More settings can be made from the Therabody app.
5. Use your JetBoots at the same time as a pair or independently of each other.
Prepare your treatment
1. After turning on and pairing your RecoveryAir JetBoots, you are ready to choose your
program settings.
2. Access two preset program options when connected to the Therabody app: Recover and
Warm-up.
3. Once you have chosen your desired program, use the Pressure button to adjust the
pressure setting.
4. Then, toggle through the time options using the Time button, to set your desired treatment
time (20min, 40min, 60min, or continuous).
5. Once you have selected the treatment options that are right for you, press start, relax, and
you'll be on your way to recovery in no time.
EN EN
2