Getting Started - Therabody RecoveryTherm Bedienungsanleitung

Getting started

Step 1
Put on your garment
1. Find a comfortable position sitting down or standing upright;
we recommend standing for optimal placement.
2. To put the RecoveryTherm™️ Hot Vibration Back & Core on,
center the Therabody logo across the treatment area, e.g.,
lower back.
3. Hold each side of the straps with the control module in your
right hand. Adjust gently to ensure they are approximately
the same distance and that the device is centered.
4. Once centered, wrap the left side of the strap around your
abdomen toward your hip and secure it by placing the right
strap on top. Secure in place with the Velcro strap. The
garment should feel snug but not too tight. The control
module should rest between the center of your body and
your right hip.
EN
3