Getting Started - Therabody RecoveryAir PRO Schnellstartanleitung

RecoveryAir PRO
EN
Fully customizable pneumatic compression system.
Your RecoveryAir PRO pneumatic compression system comes with a pump, a pair of compression
boots, a blocker plug, a DC power adapter, and a carrying pouch for both the pump and boots.

Getting started

1. To turn on the RecoveryAir PRO pump, press and hold the power button.
2. To get started, put your boots on first before attaching them to the pump. This allows you to get
into the most comfortable position and avoid any disruption in the air flow connection.
3. Next, plug in the connector from the boots into the pump. Make sure you hear a "click" so that
you know the RecoveryAir PRO is fully connected, is plugged in, and there is a proper seal.
4. Once connected and comfortable, you are ready to customize your treatment.
Prepare your treatment
1. To turn on the RecoveryAir PRO pump, press and hold the power button.
2. Customize your treatment from the pump interface.
3. Using the left & right arrows in the 4-way button, scroll through the 5 preset treatment options:
Recover, Warm-up, Isolation, Interval, and PRO Mode (Custom).
4. Once you have chosen your desired treatment preset, use the up & down arrows in the 4-way
button to adjust the pressure setting.
5. To create a custom routine, simply press the select button until a new screen appears.
6. Then, use your select and arrow buttons to navigate the options such as Pressure, Time, Hold,
Release, and Gradient, creating a fully personalized routine.
7. Once you have selected the treatment options that are right for you, push play, relax,
and you'll be on your way to recovery in no time. You can also share your routines with
other RecoveryAir users easily through the Therabody app.
1