28 7.2 Charging The E-Bike Battery - Urban Arrow Family Gebrauchsanweisung

Image 28 : Rotate the key 20 to 30 degrees clockwise
Image 29 : Push down the lever
Opening the ring lock is done as follows:
1. Put the e-bike on the kickstand (see paragraph 5.8).
2. Put the key 54 in the ring lock.
3. Rotating the key counter clockwise. The pin is spring loaded
and will return to its unlocked position automatically.
User manual
2
The key will remain in the lock when the lock is open. It
cannot be taken out.
7.2 Charging the e-bike battery
Before you use the e-bike battery for the first time you need to
check the battery before you can charge it fully. Checking is done as
follows:
1. Press the on/off button 57 to switch on the battery. At least
one of the LEDs will light up.
2
When no LED of the charge-control indicator 56 lights up, the
battery may be damaged. Contact your Urban Arrow dealer.
There are two ways of charging the e-bike battery (see image 30):
● Charging while the battery is placed in the battery holder on
the e-bike.
● Charging the battery after you removed it from the e-bike.
6
Before each use, check the battery charger, cable and plug. If
damage is detected, do not use the battery charger. Damaged
battery chargers, cables and plugs increase the risk of an
electric shock. Never open the battery charger yourself.
Contact your Urban Arrow dealer when your battery charger
is damaged.
EN
45