Tyres; E-Bike Battery Capacity Check - Urban Arrow Family Gebrauchsanweisung

8 . Check if the stem 85 , handlebar 86 and grips 87 aren't
slipping or loose.
9 . Check if the main frame connecting bolts 15 aren't loose.
10 . Check if the front 24 and rear lights 6 are working.
11 . Check if the lock rubbers 7 aren't torn and/or cracked.
5 . 4

Tyres

Infl ate your tyres to the correct pressure:
● Front tyre 2.4-3.5 bar
● Rear tyre 3-4 bar
Ask your Urban Arrow dealer for a correct pump that fi ts the
Tip
Schrader valves of your bike.
5 . 5

E-bike battery capacity check

There are two ways to check the charge conditions of the e-bike
battery:
● On the battery
● On the display
2
When the e-bike battery is empty the e-bike can be ridden as
a normal bicycle without assistance.
User manual
Checking the charge conditions on the e-bike battery is done as
follows:
1 . Press the on/off button 57 on the battery.
2 . Check the fi ve green LEDs of the charge-control indicator 56
on the battery.
Each LED indicates approx. 20% capacity. When the battery is
completely charged, all fi ve LEDs light up.
2
If the capacity of the battery is below 5%, all LEDs of the
charge-control indicator go out.
Each bar of the battery symbol is equivalent to a capacity of
approx. 20% (see image 15 ).
The e-bike battery pack is fully charged.
The e-bike battery pack should be recharged.
The LEDs of the charge-control indicator on the
battery pack extinguish. The capacity for assisting
the drive has been used up, and assistance is
gently switched off. The remaining capacity is made
available for the lighting and the on-board computer.
The charge-control indicator fl ashes. The capacity
of the e-bike battery pack is enough for about two
hours of lighting.
Image 15 : The charge conditions
EN
27