20 6.2 Changing The Assistance Level; 22 6.3 Switch Push Assistance Mode On And Off - Urban Arrow Family Gebrauchsanweisung

6.2 Changing the assistance level
The electrical drive unit of the e-bike assists you when you pedal.
The level of assistance can be changed while cycling or standing
still. You can also ride your e-bike as a normal bicycle without
assistance.
The following assistance levels are available:
No assistance OFF The motor assistance is switched off
and the e-bike can be used as a normal
bicycle. The push assistance cannot be
activated in this assistance level.
ECO Effective assistance at maximum
efficiency for maximum cruising range.
TOUR Uniform assistance, for touring with long
cruising range.
SPORT Powerful assistance for sportive riding
as well as for urban traffic.
Maximum TURBO Maximum assistance, supporting highest
assistance cadence for sportive riding.
Changing the assistance level with the Kiox display is done as
follows:
a. Shifting to a higher assistance level by pressing the +
button 97 on the control unit until the desired assistance
level appears on the indicator 73.
b. Shifting to a lower assistance level by pressing the -
button 93 on the control unit until the desired assistance
level appears on the indicator 73.
User manual
2
The maximum motor output depends on the selected
assistance level.
2
If the display is removed from the holder, the assistance level
that was last displayed is saved.
Changing the assistance level with the Purion display is done as
follows:
a. Shifting to a higher assistance level by pressing the +
button 103 less than 1 second until the desired assistance
level appears on the indicator 112.
b. Shifting to a lower assistance level by pressing the -
button 102 less than 1 second until the desired assistance
level appears on the indicator 112.
2
When the display is set to TRIP, TOTAL or RANGE the
selected assistance will only be shown for about 1 second on
the display when changing the assistance level.
6.3 Switch push assistance mode on and off
The push assistance feature makes it easier to push the e-bike. The
speed in this function depends on the set gear and cannot exceed
6 km/h (max.). The lower the set gear, the lower the speed in the
push-assistance function (at full output). How the push assistance is
switched on or off depends on the type of display on your bike.
EN
41