Urban Arrow Family Gebrauchsanweisung Seite 26

System settings
24h form (24h time
format)
Brgh backg. (Bright
background)
Imp.units (Imperial
units)
Language
Factory reset
The following system settings can be changed in the menu My eBike
on the Kiox display:
System settings
Wheel circum.
24 Urban Arrow Family
Explanation
This time format can be switched on or
off.
The bright background can be switched
on or off.
If this option is switched on, imperial
measurements are used (e.g. miles
instead of kilometres).
The required language for the interface
can be selected here from 9 options.
This menu item can be used to reset the
display to factory settings.
Explanation
The value of the wheel circumference can
be adjusted or reset here.
The following non-changeable system settings are available in the
menu My eBike on the Kiox display:
System settings Explanation
Next service Indicates the distance till your e-bike
needs the next service.
Components The serial number, part number, and
software version (when applicable) of the
Bosch e-bike battery, motor, and display.
Selecting system settings in Sys. settings or My eBike
2
To select system settings, the display should be placed in the
holder 47. System settings can only be selected while the
e-bike is stationary. You can't select settings while riding.
1. Press the on/off button 82 of the display. The start page will
appear.
2. Press the < button 95 on the operating unit. The status page
will appear.
3. Press the selecting button 94. The menu Settings will appear.
4. Press the + button 97 or – button 93 until Sys. settings or My
eBike is selected.
5. Press the selection button 94 to confirm your choice.
6. Select the required system setting using the + button 97 or –
button 93 and press the selection button 94 to confirm your
choice.