Influences On The Operating Range; Safety Check Before Every Ride - Urban Arrow Family Gebrauchsanweisung

5 . 2 Infl uences on the operating range
The operating range depends on many factors, such as:
● Assistance level,
● Gear switching behavior,
● Bicycle tyres and tyre pressure,
● Model, age and condition of the e-bike battery,
● Route profi le (inclines) and road or path conditions (road or
path surface),
● Head wind and ambient temperature,
● Weight of the e-bike, rider and equipment/luggage.
For this reason, it is not possible to precisely predict the range
before and during a trip. General rules:
● For the same motor output of the electrical drive unit: The
less power or force you have to bring about to reach a certain
speed (e.g. through optimal use of the gears), the less energy
the electrical drive unit will consume, and the greater the
range of your e-bike battery.
● The higher the assistance level under otherwise same
conditions, the lower the range.
5 . 3

Safety check before every ride

To ensure your bike is safe to ride please check the following safety
points before every ride (see image 14 ). These are quick checks to
avoid mechanical malfunctions. Don't use the bike if your bike fails
on any of the points and you are not able to solve the issue following
the instructions in this manual. Contact your Urban Arrow dealer to
discuss the problem.
26 Urban Arrow Family
10
1
3 2
Image 14 : Quick safety check
1 . Check if the axle nuts 10 and the drop out bolts 9 aren't loose.
2 . Check if the tyres aren't running against the fenders 8 , the
frame or the lock 7 .
3 . Check if the tyres are well infl ated. (see paragraph 5 . 4 for
information on the correct tyre pressure).
4 . Check if the linkage between the handlebar 86 and the fork 22
is play free and that the linkage turns directly and smooth.
5 . Check if the brakes 84 and 87 are working.
6 . Make sure the kickstand 17 folds upwards and keeps its
position. (see paragraph 5 . 8 . 1 for information on the correct
position of the kickstand and how to correct the position in
case it is not correct).
7 . Check if the seat post 48 doesn't slip in the frame, make sure
the seat post clamp 51 is tightened.
4
8
5
9
7
10
2
4 6 1 3