VOLTCRAFT 1090519 Bedienungsanleitung Seite 27

• To prevent an electric shock, do not touch the measuring points when taking measurements, either
directly or indirectly. When taking measurements, do not touch any area beyond the grip markings on
the probe tips.
• Do not use the multimeter just before, during or just after an electrical storm (electric shock /high-power
surges!). Ensure that your hands, shoes, clothes, the floor, circuit and circuit components are dry.
• Avoid using the device in the immediate vicinity of:
- s trong magnetic or electromagnetic fields
- transmitting antennas or HF generators.
These may distort the measurements.
• If you suspect that safe operation is no longer possible, stop using the device immediately and prevent
unauthorised use. Safe operation can no longer be assumed if:
- There are signs of damage
- The device does not function properly
- The device was stored under unfavourable conditions for a long period of time
- The device was subjected to rough handling during transport.
• Do not switch the measuring device on immediately after it has been brought from a cold room into a
warm one. The condensation generated may destroy the product. Leave the device switched off and
allow it to reach room temperature.
• Do not leave packaging material lying around carelessly, as it may become a dangerous toy for children.
• Observe the safety information in each section.
27