Table 7: Further Control Sequences, supported by IBM Emulation Mode (Native
Commands)
Escape Sequence Mnemonic
ESC [ ; P2 ; P3 ; P4 ; P5 ; P6 ; P7 SP z
see Appendix F
BARCODE Programming
ESC [ ? 0 h
ESC [ ? 0 l
Function
BH
Barcode Header
P2: Barcode typ
P3: Height of barcode
P4: Width of the thin bars
P5: Width of the thin gaps
P6: Ratio width to thin (bars / gaps)
P7: Uni-directional or bi-directional printing
0 : or not programmed: means no changes
1 : uni-directional printing in LQ
2 : bi-directional printing in LQ
3 : uni-directional printing in NLQ
4 : bi-directional printing in NLQ
SMBC
Set Mode Barcode
RSBC
Reset Mode Barcode
Appendix D IBM ProPrinter Quick Refernce
D-18