PSI Matrix PP 803 Benutzerhandbuch Seite 261

Appendix D IBM ProPrinter Quick Refernce
Table 3: Vertical Form Handling
Escape Sequence
ESC 0
ESC 1
ESC 2
ESC 4
ESC 5 P1
ESC B NUL
ESC B P1 P2 . . . P64 NUL
ESC C P1
ESC C NUL P1
ESC N P1
ESC O
ESC [ \ EOT NUL NUL NUL P1 NUL Set Line Space Unit EOT = 0/4 P1 = B/4 : select
Mnemonic Function
Set Line Space to 1 / 8 "
Set Line Space to 7 / 72 "
Start Variable Line Space
Set Top of Form
Carriage Return Function
P1 = 1 or 0/1: select CR + LF P1 = 0 or 0/0: cancel CR
Set Line Space to P1 / 72 " ( P1 / 60 ") P1 = P1 / 72 " lpi
(non AGM) P1 = P1 / 60 " lpi (AGM) (P1 = 0/1...5/5)
Note: Default = 12 / 72 " or 6 lpi
Clear all Vertical Tabs
Set Vertical Tabs
Set Form Length in Lines (P1 = 0/1...7/F)
Set Form Length in Inches (P1 = 0/1...1/6)
Set Automatic Perforation Skip
P1: number of lines from bottom of paper to skip.
(P1 = 0/0...F/F)
Cancel Automatic Perforation Skip
1/180" P1 = D/8 : select 1/216" P1 = 0/0 : setting
remains unchanged
(Pn = 0/1...F/F)
D-3