PSI Matrix PP 803 Benutzerhandbuch Seite 275

Appendix D IBM ProPrinter Quick Refernce
Table 7: Further Control Sequences, supported by IBM Emulation Mode
(Native Commands)
Escape Sequence Mnemonic Function
ESC [ P1 b
ESC [ P1 d
ESC [ P1 e
ESC [ P1 g
ESC [ P1 w
ESC [ P1 {
ESC [ P1 m
RPT Repeat Character
P1 = number of repetitions (P1 = 1...999)
VPA Set Vertical Position Absolute
P1 = 0 or 1: Top of Form / Top Margin
P1 = 2... 9999: Vertical Line
VPR Set Vertical Position Relative
P1 = 0 or 1: moves the position one line
P1 = 2... 9999: Vertical Line
TBC Tabulation Clear
P1 = 0: at active print pos. all tabs and margin marker,
P1 = 3: all horizontal-,
P1 = 4: all vertical tabs and margin marker
SNV Set National Version
P1 = 1 - 15 national version
depending on selected character set (see SNVCT and
Appendix C Character Set Tables)
LSL Line Space Load
P1 = 1, 2, 3, 4, 6, 8, 12, 16, 24, 48, 60, 72, 90, 144,
180, 360
SGR Set Graphic Rendition
P1 = 0: default - no rendition or rendition reset
P1 = 1: bold
P1 = 3: italics
P1 = 4: underline
P1 = 9: crossed out or strike through printing
P1 = 20: enlarged double width printing
P1 = 21: double underline
P1 = 22: bold reset
P1 = 23: italics reset
P1 = 24: underline reset
P1 = 29: crossed out reset
P1 = 30 to 36: ignored
P1 = 53: over lined
P1 = 55: over lined reset
D-17