PSI Matrix PP 803 Benutzerhandbuch Seite 266

Table 4: Horizontal Form Handling and Printing Modes
Escape Sequence Mnemonic
ESC T
ESC U P1
ESC W P1
ESC X P1 P2
ESC d P1 P2
ESC <
ESC ;
ESC [ P1 SP r
Native Command
The LQ / NLQ selection becomes active if a LQ-/NLQ-font is selected. Draft / HSD
Note:
becomes active if type style DATA is selected.
D-8
Function
Cancel Superscript/Subscript
Cancel / Select Unidirectional Printing
P1 = 0/0 or 0 : cancel Unidirectional
P1 = 0/1 or 1 : select Unidirectional
Cancel / Select Double Width
P1 = 0/0 or 0 : cancel Double Width
P1 = 0/1 or 1 : select Double Width
Set Left and Right Margins
P1 : Left Margin
P2 : Right Margin
Set Relative Horizontal Dot Position
(P1 + P2 x 256)/120"
Home Position of Printhead (left margin)
Set Left Margin at Current Position
SPQ Select Print Quality LQ / NLQ
P1 = 0 : LQ
P1 = 1 : NLQ; this is only valid if the NLQ type style is
available.
P1 = 2 : Draft
P1 = 3 : HSD (High Speed Draft)
Appendix D IBM ProPrinter Quick Refernce
(Pn = 0/0...F/F)
(Pn = 0/0...F/F)