Inhaltsverzeichnis
Werbung
Recommended separation distances between portable and mobile RF
communications equipment for MIO-PERISTIM that are not life-supporting
MIO-PERISTIM is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of MIO-PERISTIM
can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and
MIO-PERISTIM as recommended below, according to the maximum output power of
the communications equipment.
Rated maximum
output power of
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be determined using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter
in watts (W) according to the transmitter manufacturer.
Note
1)
At 80 MHz and 800 MHz the separation distance for the higher frequency range applies.
2)
These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
MIO-PERISTIM. Alle Rechte vorbehalten. MIO-PERISTIM und das Logo
sind das ausschließliche Eigentum von I.A.C.E.R. Srl und sind
registriert
Ausgabe: MNPG181-06 vom 10.08.2020.
IACER Srl
Separation distance according to the frequency of the
from 150kHz
to 800 MHz
0.12
0.38
1.2
3.8
12
43
from 80MHz
transmitter (m)
to 800 MHz
0.12
0.38
1.2
3.8
12
from 800MHz
to 2,7GHz
0.23
0.73
2.3
7.3
23
MNPG181-06
Werbung
Inhaltsverzeichnis
