Inhaltsverzeichnis
Werbung
ELECTROMAGNETIC COMPATIBILITY TABLES
Guidance and manufacturer's declaration – ELECTROMAGNETIC EMISSIONS –
MAG2000 family is expected to operate in the electromagnetic environment
below specified. The customer or user of the MAG2000 family must ensure that
it is used in such environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Guidance and manufacturer's declaration – ELECTROMAGNETIC IMMUNITY –
MAG2000 is intended for use in the electromagnetic environment specified
below. The user or operator of MAG2000 should assure that is used in such
environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical
fast
transient/burst
IACER Srl
FOR ALL DEVICES AND SYSTEMS
Compliance
Group 1
Class B
Class A
Compliant
FOR ALL DEVICES AND SYSTEMS
Test level
Compliance
IEC 60601
±6kV; +8kV at
±6kV; ±8kV
contact
at contact
±8kV; +15kV in
±8kV; +15kV
air
in air
±2kV
±2kV
for power
for power
supply lines
supply lines
27
Electromagnetic environment –
guidance
MAG2000 family uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are unlikely to cause
any
interference
electronic equipment
MAG2000 is suitable for use in all
establishments,
domestic
establishments
those directly connected to the
public low-voltage power supply
network that supplies buildings
used for domestic purposes.
Electromagnetic
environment –
level
guidance
Floors should be wood,
concrete or ceramic
tile. If floor is covered
with synthetic material,
the relative humidity
should be at least 30%.
Mains power quality
should be at least that
one
of
in
nearby
including
and
a
typical
MNPG315-00
Werbung
Inhaltsverzeichnis
