Renishaw SP25M Installationsanleitung Seite 23

SP25M installation and integration guide
www.renishaw.com
AC3 card - installation
The AC3 is a 16-bit ISA expansion card that is designed to fit into one of the 16-bit expansion slots provided in a PC. It is simple to install and
connects directly to a standard Renishaw multiwire probe signal cable.
CAUTION: The AC3 contains static sensitive components. Observe anti-static handling precautions, including the use of earth
straps during handling and installation. Always consult the user manual or technical reference of your PC for specific instructions
and warnings.
General instructions for installation of AC3
1. Consult the documentation supplied with the PC for specific instructions and warnings.
2. Remove power from the PC.
3. Remove external covers of the PC (observe anti-static precautions).
4. Locate a vacant 16-bit expansion slot into which the card can be fitted.
5. Remove the expansion slot panel on the rear panel of the PC.
6. Carefully insert the card into the slot in accordance to the PC manufacturer's instructions ensuring that no parts on the board touch any
other adaptor boards or clash with any other parts of the PC.
7. Screw the mounting bracket of the AC3 to the PC back panel rail. Check the installation.
8. Replace the covers of the PC.
AC3 - current consumption
The nominal current consumption of the AC3 in normal operation with the probe connected is:
593 mA @ 5 V
Issued 12 2021
17 mA @ 12 V 10.86 mA @ -12 V
23