Renishaw SP25M Installationsanleitung Seite 12

SP25M installation and integration guide
www.renishaw.com
SP25M installation
NOTE: All SP25M system components are identified with an engraved product name.
The front of each system component can be identified by the position of the Renishaw logo and the small alignment marks (where applicable).
Observe the kinematic mating faces between the SM25 scanning modules and each respective SH25 stylus holder. Each stylus holder
kinematic face features four balls, three of which are arranged in a triangular formation which form one half of the kinematic joint between
the stylus holder and each respective module. The fourth ball is positioned so that only the scanning module and respective stylus holder can
be fitted and used together.
When installing and using the various system elements it is essential that the kinematic joints are clean and free from contaminants. Please
refer to the maintenance pages for further cleaning instructions.
Renishaw probes and associated systems are precision tools used for obtaining precise measurements and must therefore be treated with
care. The SP25M probe body and scanning modules are liable to irreparable damage if dropped or mistreated.
Issued 12 2021
12