Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
Do not damage the flexible PCB at the Bus-I/O!
Mechanical stress damages the flexible at Bus-I/O!
STOP
The flexible PCB must
• not be kinked
• not be twisted
• not be bent tightly
Do not pull at the flexible PCB!
Conditions for trouble-free operation
Ÿ Except for the mains cable, use shielded cables only.
Ÿ The shield must be carefully connected to PE (see below).
Ÿ Connect motor and mains PE conductors to separate PE terminals.
Shield connection
6. Prepare cable
7. Insert the cable tie
8. Lay cable into the cable
tie and tighten it. The
screen must be tightly
connected to the screen
sheet 0 .
l
Installation
A
A
- 2 -
8200mot045
8200mot046
PES
8200mot047
EDK82ZAFB 2.0
Werbung
Inhaltsverzeichnis
