pyrexx PX-1 Betriebsanleitung Seite 38

1. Splint pin (activation backup) 1. Splint pin (activation backup)
The splint pin (activation backup) is used during
the transport of the device to protect against
accidental activation.
2. Activation button 2. Activation button
The activation button is used to turn the device
on and off.
3. Magnet carrier 3. Magnet carrier
The magnet carrier is used for fastening the
device.
4. Smoke intake lamellas 4. Smoke intake lamellas
38
Smoke from the fire reaches the inside
of the device through the smoke intake
lamellas and can then be detected by
sensors.
5. Testing/stop button 5. Testing/stop button
(smoke alarm device cover) (smoke alarm device cover)
The testing/stop button (smoke alarm
device cover) is used for a self-test.
The testing/stop button (smoke alarm device
cover) can be pressed to interrupt
or stop alarm and alert tones.
Operating Manual: PX-1 - Smoke Alarm Device