Audio: Die Audioführung erfolgt über Dante Controller oder die Shure DesignerSoftware. Dante Virtual Soundcard er
möglicht Audio-Abhörung und -Aufzeichnung direkt am Computer.
Hardware
Netzwerk-Ethernet-Anschluss
Der Netzwerk-Anschluss transportiert Ton, Strom und Steuerungsdaten. Er ist an der Rückseite, wie dargestellt, angeordnet.
① Netzwerk-Anschluss
RJ-45-Buchse zum Netzwerk-Anschluss.
② Netzwerkstatus-LED (grün)
Off = keine Netzwerkverbindung
Ein = Netzwerkverbindung hergestellt
Blinkend = Netzwerkverbindung aktiv
③ Netzwerkgeschwindigkeits-LED (orange)
Aus = 10/100 Mbps
Ein = 1 Gbps
LED Light Bar
The LED on the microphone indicates whether the microphone is active or muted, identifies the hardware, and provides confir
mation of firmware updates.
™
Shure Incorporated
9/61