Power Over Ethernet (Poe); Reset Button; Reset Modes; Software Reset Options - Shure Mxa910 Bedienungsanleitung

Dimming and Disabling
To dim or turn off the LED, use the brightness fader.

Power Over Ethernet (PoE)

Dieses Gerät benötigt zum Betrieb PoE. Es ist sowohl mit PoE-Quellen der Klasse 0 als auch Klasse 3 kompatibel.
Power over Ethernet wird auf eine der folgenden Weisen bereitgestellt:
• Ein Netzwerk-Switch, der PoE bereitstellt
• Eine PoE-Einleitungsvorrichtung

Reset Button

The hardware reset button is located inside a grille hole and can be pushed with a paperclip or other small tool. The hole is
identified with a gray circle. When looking at the Shure logo, it is the second hole in the fourth row from the top.

Reset Modes

Network reset (press button for 4-8 seconds)
Resets all Shure control and audio network IP settings to factory defaults. Red LED along bar.
Full factory reset (press button for longer than 8 seconds)
Restores all network and web application settings to the factory defaults. Multicolor flash, then blue LED along bar.

Software Reset Options

Reboot Device (Settings > Factory Reset): Power-cycles the device as if it were unplugged from the network. All settings
are retained when the device is rebooted.
Default Settings (Presets > Restore default settings): Restores audio settings back to factory settings (excluding de­
vice name, IP settings, and passwords).
Shure Incorporated
11/61