Environmental Influences; Electrical Data; Approvals And Approval Marks - JUMO MIDAS S22 Ex Betriebsanleitung

4 Technical data
4.5

Environmental influences

Admissible temperatures
Ambient temperature range
Storage temperature range
Medium temperature range
Protection type
Electromagnetic compatibility
Interference emission
Interference immunity
Mechanical load
c
Shock resistance
d
Vibration resistance
a
EN 61326
b
The product is suitable for industrial use as well as for households and small businesses.
c
DIN EN 60068-2-27
d
DIN EN 60068-2-6
4.6

Electrical data

a
Voltage supply U
B
4 to 20 mA, 2-wire (output 405)
Current consumption
Electrical circuit
a
Residual ripple: the voltage peaks must not exceed or fall below the specified voltage supply values!
4.7

Approvals and approval marks

ATEX
Testing agency
Certificates/certification numbers SEV 21 ATEX 0537 X
Inspection basis
Valid for
IEC Ex
Testing agency
Certificates/certification numbers IECEx SEV 21.0011X
Inspection basis
Valid for
NOTE!
For the special conditions for use, the examination certificate must be observed,
 chapter 9 "Examination certificate", Page 25.
14
Front-flush
10 to 40 °C
10 to 40 °C
10 to 40 °C
IP68 according to DIN EN 60529
a
b
Class B
Industrial requirement
20 g/11 ms, 50 g for 1 ms
10 g at 10 to 2000 Hz
DC 16 to 28 V
≤ 23 mA
Intrinsically safe
Eurofins Electrosuisse Product Testing AG
DIN EN 60079-0, DIN EN 60079-11
Type 404720
Eurofins Electrosuisse Product Testing AG
IEC 60079-0, IEC 60079-11
Type 404720
Not front-flush
-20 °C to +85 °C
-20 °C to +85 °C
-20 °C to +85 °C