Technical Data; Environment Concerns - Electrolux GA45GLV220 Benutzerinformation

64 electrolux
Problem
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold buttons (4) and (5) at the
same time until the indicators of buttons
(3), (4) and (5) flash.
4. Release buttons (4) and (5).
5. Press button (4).
• The indicators of buttons (3) and (5)
go off

TECHNICAL DATA

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with 3/4" thread.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
photovoltaic panels and aeolian), use a

ENVIRONMENT CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
All manuals and user guides at all-guides.com
Possible cause
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
6. Press button (4) to change the setting.
7. Deactivate the appliance to confirm.
Width
Height
Depth
Voltage
Overall power
Fuse
Frequency
min.
max.
Cold water or hot water
Place settings
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
Possible solution
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
• The indicator of button (4) continues
to flash
• The display shows the setting of the
rinse aid dispenser.
Rinse aid dispenser
is off.
Rinse aid dispenser
is on.
hot water supply to decrease energy
consumption.
446 mm
818 - 898 mm
550 mm
220-240 V
2100 W
10 A
50 Hz
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
max. 60 °C
9
.