Trouble Shooting - Parkside PSTD 800 C3 Originalbetriebsanleitung

Trouble shooting

Before carrying out work on the device, switch it off and unplug
the mains plug.
Problem
Appliance won't
start
Intermittent
operation
Poor sawing perfor-
mance
Saw blade quickly
becomes blunt
Possible cause
On/Off switch (
tive
Motor defective
Internal loose contact
On/Off switch (
tive
Saw blade ( 20/21) unsuit-
able for the workpiece to be
processed
Saw blade ( 20/21) is
blunt
Incorrect sawing speed
Saw blade ( 20/21) unsuit-
able for the workpiece to be
processed
Too much pressure applied
Sawing speed too high
Corrective action
3) defec-
Send in to Service Centre for
repair
Send in to Service Centre for
repair
3) defec-
Insert a suitable saw blade
( 20/21)
Insert a new saw blade
( 20/21)
Adjust sawing speed
Insert a suitable saw blade
( 20/21)
Reduce the pressure
Reduce the sawing speed
GB IE
31