Trouble Shooting - Parkside PSTDA 20-Li B3 Originalbetriebsanleitung

Trouble shooting

In the event of an accident or malfunction, remove the battery from the device im-
mediately! Failure to comply may result in injuries from cuts.
Problem
Appliance won't
start
Intermittent
operation
Poor sawing perfor-
mance
Saw blade quickly
becomes blunt
Possible cause
Battery ( 22) not inserted
Battery ( 22) discharged
On/Off switch (
Motor defective
Internal loose contact
On/Off switch (
Saw blade ( 16/17) unsuit-
able for the workpiece to be
processed
Saw blade ( 16/17) is
blunt
Incorrect sawing speed
Low battery power
Saw blade ( 16/17) unsuit-
able for the workpiece to be
processed
Too much pressure applied
Sawing speed too high
Corrective action
Insert battery (
the separate operating instruc-
tions for the rechargeable batte-
ry and charger)
Recharge battery (
serve the separate operating
instructions for the rechargeable
battery and charger)
2) defective
Send in to Service Centre for
repair
Send in to Service Centre for
repair
2) defective
Insert a suitable saw blade
(
Insert a new saw blade
(
Adjust sawing speed
Charge the battery (
(observe the separate operating
instructions for the battery and
charger)
Insert a suitable saw blade
(
Reduce the pressure
Reduce the sawing speed
GB
22) (Observe
22) (Ob-
16/17)
16/17)
16/17)
IE
22)
39