Taking A Measurement - Parkside PMSHM 2 A1 Bedienungs- Und Sicherheitshinweise

Remove the bark from firewood if needed.
Press the measuring pins
in various places on the wood.

Taking a measurement

Press the
product. On the display
surrounding temperature in °C and the previ-
ously selected material 1‒6 (see table refer-
ence values) appears.
Press the M / °C / °F button
down for approximately 5 seconds to switch
the temperature display between °C and °F.
Press the M / °C / °F button
material number of which you wish to meas-
ure the moisture level.
Wood moisture approximate value
for firewood
Note: Above table is reference for checking the
status of firewood. If the measured wood moisture
level is 15 % or below, the firewood is ideal for
heating. If the measured wood moisture level is
from 16 to 20 %, the firewood is medium dry. If
the measured wood moisture level is 21 % or
above, the firewood is not suitable for heating
and further drying is necessary.
button
4
6–
15 %
16–
20 %
21–
X
44 %
against the grain
2
to turn on the
"0.0%", the
8
and hold it
3
to select the
3
ideal for heating –
high heating value
restricted heating –
low heating value
not suitable for hea-
ting – further drying
necessary
GB/IE 29