Battery Display; Temperature Display; Reset Function - Parkside PMSHM 2 A1 Bedienungs- Und Sicherheitshinweise

the
display
show the lock symbol
Press the
other measurement.
If you have completed your measurement,
switch the moisture measuring product off by
pressing holding the
than 5 seconds.
Note: The moisture measuring product
switches itself off automatically if the product
is not used for 60 seconds approximately.

Battery display

If the battery charge status is low, the low battery
indicator
11
note that while the batteries are low, the meas-
ured values will be false or inaccurate. Replace
the batteries as quickly as possible if this display
appears. The battery change is described in the
section "Inserting / changing the batteries".

Temperature display

You can change the temperature display between
°C and °F by holding down M / °C / °F button
for approximately 5 seconds.
3

Reset function

A calibration can be performed if 0.0 % is not
shown on the display
product. For this, open the battery compartment
button to freeze the result on the
4
. The display
8
button
appears on the display
8
will then also
8
.
12
again to take an-
4
button
8
right after turn ON the
for more
4
. Please
GB/IE 31