Herunterladen Inhalt Inhalt Diese Seite drucken

Start-Up; Before You Take A Measurement; Taking A Measurement - Parkside PMSHM 2 A1 Bedienungs- Und Sicherheitshinweise

Bau- und holzfeuchtemessgerät
Vorschau ausblenden Andere Handbücher für PMSHM 2 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Insert the batteries in the battery compart-
ment and close the cover again, so that it
audibly latches into place.
Note: No button should be pressed while
inserting the batteries.

Start-up

Before you take a
measurement
Ensure that both measuring pins
touch the
2
surface of the material at the same time.
Increase the pressure on the measuring pins
for rough surfaces if necessary.
For delicate surfaces complete the measure-
ment on a section that is not in the visible
area.
Note: The measuring pins are sharp and
may dent or damage the surface.
Rub the damp residue on the surface before
taking the measurement.
Measure several places and take an average
value.
Be aware that salts can increase the conduc-
tivity of water. This can lead to incorrect
readings and results that are too high.
Remove the bark from firewood if needed.
Press the measuring pins against the grain in
various places on the wood.

Taking a measurement

Press the
button
to turn on the
4
product. On the display
"0.0%", the
8
GB/IE/NI
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis