Fixing The Product; Mounting The Charging Station; Maintenance And Cleaning; Disposal - Parkside PASL 4000 B2 Bedienungs- Und Sicherheitshinweise

Fixing the product

The product can be used in 2 ways without having
to hold it in your hand:
Hold the magnet
7
base against a metallic magnetic surface.
8
The product remains in this position.
Fold out the fold-out hook
the product from a suitable suspension point.
The fold-out hook
360 degree.

Mounting the charging station

(see fig. C)
Note: You will need an electric drill.
CAUTION! RISK OF INJURY! Please read the
operating instructions for your drill.
CAUTION! Ensure that you do not damage any
electricity cables in the wall or ceiling.
Mark the two mounting holes at a distance of
approx. 35 mm apart.
Now drill the holes on the wall (ø approx.
6 mm; depth approx. 30 mm).
Insert the dowels
15
necessary use a hammer to make this easier.
Screw up the screws
Now hang the charging station to the screws
via the mounting holes
Use the included drill template intended for
marking the drill holes.

Maintenance and cleaning

The product requires no maintenance. The LEDs
cannot be replaced.
Switch off and disconnect the product from the
power supply before you clean it.
Never immerse the product in water or other
liquids.
Do not use corrosive cleaning agents.
Clean the product regularly with a dry, fluff-free
cloth. Use a slightly moist cloth to remove any
stubborn dirt.
10 GB
at the back or the magnetic
to suspend
5
can be turned through
5
into the drilled holes. If
on the dowels
14 15
.
13

Disposal

The packaging is made entirely of recyclable ma-
terials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal au-
thority for more details of how to dispose
of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful life
and not in the household waste. Infor-
mation on collection points and their
opening hours can be obtained from
. your local authority.
Faulty or used batteries / rechargeable batteries
must be recycled in accordance with Directive
2006/66/EC and its amendments. Please return
the batteries / rechargeable batteries and / or the
product to the available collection points.
Environmental damage through
incorrect disposal of the batter-
ies / rechargeable batteries!
Batteries / rechargeable batteries may not be dis-
posed of with the usual domestic waste. They may
contain toxic heavy metals and are subject to haz-
ardous waste treatment rules and regulations. The
chemical symbols for heavy metals are as follows:
Cd = cadmium, Hg = mercury, Pb = lead. That is
why you should dispose of used batteries / recharge-
able batteries at a local collection point.