Herunterladen Inhalt Inhalt Diese Seite drucken

Before Use; Charging The Product; Fixing The Product; Using The Product Without A Power Connection - Parkside PAAD 2 A1 Bedienungs- Und Sicherheitshinweise

Akku-arbeitsleuchte
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
battery may only be carried out by the manu-
facturer or his customer service or by a similarly
qualified person in order to avoid hazards.
When disposing of the product, it should be
noted that this product contains a rechargeable
battery.

Before use

Charging the product

Note: Remove all packaging materials from the
product.
Note: You can recharge the product by using the
USB cable
provided with the specified input
8
voltage and current (see "Technical data").
Note: In order to use the product without a USB
cable
, you need to recharge the rechargeable
8
battery before use. The charging process takes
about 3 to 4 hours.
Insert the Micro USB plug of the USB cable
into micro-USB input socket
8
product.
Then insert the USB plug of the USB cable
into the USB port on USB power supply.
Note: Pay attention to the distance between
the lamp and USB power supply because
USB cable
length is approx. 50 cm.
8
Note: During charging, the charging indicator
lights up red. When charging is complete, the
7
charging indicator
7
charging indicator
7
cable
from the micro-USB input socket
8
the product to prevent the rechargeable battery
from discharging.

Fixing the product

The product can be used in 2 ways without having
to hold it in your hand:
Fold out the hook
from a suitable suspension point.
14 GB/IE
of the
6
lights up green. When the
is green, pull out the USB
6
to suspend the product
5
Fold out the stands
to stand on the ground (see Fig. B).
CAUTION! Please note the position of your
hands whilst opening and closing the stands
to prevent pinching your fingers (see Fig. C).
4
Using the product without
a power connection
Fully charge the product as described in the
section "Charging the product".
The product can be operated in 4 different
modes, select these by repeatedly pressing
the ON / OFF switch
press once: The side light
lights up at low power.
press twice: The side light
8
lights up at full power.
press three times: Switches the
side light
the spotlight
of
press four times: Switches off
the product
to let the product able
4
.
3
2
2
off and switches on
2
.
1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis