Herunterladen Diese Seite drucken

Mounting The Gearbox; Adjusting The Cutter Bar - Stihl HLE 71 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für HLE 71:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

6 Mounting the Gearbox

6
Mounting the Gearbox
1
3
2
4
► Loosen the clamp screws (1)
► Line up the sliding sleeve (2) – it must be in
line with the opening in the angle drive
► Push the gearbox (3) onto the drive tube (4),
turn the gearbox back and forth as necessary
3
► Once the end of the drive tube is inserted
beyond the slot in the clamp (5), push the
gearbox fully home
► Screw in the clamping screws as far as possi‐
ble
► Align the gear unit (3)
► Tighten clamping screws
0458-277-9621-B
1
5
7

Adjusting the Cutter Bar

7.1
Adjustment mechanism 125°
In this version, the angle of the cutting bar rela‐
tive to the shaft is adjustable from 0° (completely
straight) to 45° (in 4 stages upward) and to 80°
(in 7 stages downward). Twelve individually
adjustable working positions are possible.
Additionally, the cutting bar can be set to a
defined transport position.
English
27

Werbung

loading