Installation And Truss Mountng - Cameo ZENIT W300i Bedienungsanleitung

INSTALLATION AND TRUSS MOUNTNG

Thanks to its integrated plastic feet, the light can be positioned in a suitable location on a level
surface. Installation on a truss is carried out with the help of an Omega bracket which is mounted
on the underside of the device base with a suitable tool (A). 1 x Omega bracket and 2 x M8 socket
screws and washers are included. Suitable truss clamps are optionally available. Ensure firm
connections and secure the spotlight to the intended position (B) with a suitable safety cable if
required.
HAZARD: Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk of incorrectly mounted and secured devices coming loose and falling
down. This can cause serious injury or death.
26
B
A