Setting Up And Mounting - Cameo NANOSPOT 300 Bedienungsanleitung

GOBO
As soon as you press on "GOBO", one of the 7 gobos plus open can now be selected using the number keys 1 to 8 (1 = open).
COLOR
As soon as you press on "COLOR", one of the 7 colour filters plus open can now be selected using the number keys 1 to 8 (1 = open).
STROBE
To activate the stroboscope effect, press on "STROBE" and then select the speed of the strobe using the number keys 1 to 9 (1 = strobe
disabled, 2 = slowest flash frequency, 9 = fastest flash frequency).
DIMMER+
Increase the brightness level by pressing "DIMMER+".
DIMMER-
Decrease the brightness level by pressing "DIMMER-".
1 - 9
The number keys 1 to 9 are used to select the different gobos, colour filters, strobe speed and internal programs.
SOUND ON
While one of the 7 internal show programs is selected, the Music control mode can be activated by pressing "SOUND ON". Now the selected
program is controlled via the built-in microphone and follows the beat of the music (bass pulses).
SOUND OFF
Press "SOUND OFF" to disable the Music control mode.
SHOW
Press "SHOW" to activate one of the 7 different Show programs using the number keys 1 to 7.
Press "STAND BY" to disable the IR remote control mode. The spotlight now changes to the mode that was previously selected.

SETTING UP AND MOUNTING

Thanks to the integrated rubber feet, the spotlight can be placed in a suitable location on the stage floor etc.
Mounting on a truss is performed with the help of the supplied omega mounting bracket; secure the device with a suitable safety rope to
the safety screw eye. Fix both firmly onto the base plate of the spotlight, suitable screws are included in the delivery.
NOTE: Overhead installation should only be carried out by trained personnel.
8