Fixing The Bottom Bar - Renson Fixscreen Minimal Montageanleitung

Fixscreen
®
en
Compatible with Reynaers Aluminium ConceptWall 50
3.7 • Fixing the bottom bar
1
Connect the motor. Lower the
screen to an easy working
height.
Attention ! Guide the screen
as it will not lower automati-
cally since the bottom bar is
absent.
4
Push the clip profile into the bottom bar. While doing so, press
the clip profile both behind and in front of the screen.
34
Minimal Curtain wall 50
2
Keep the bottom bar as
horizontal as possible at all
times so that the weight does
not rest on the ends. The
fixed bottom bar finger is
located on the window side.
The movable bottom bar
finger therefore remains fully
accessible.
3
To snap the bottom bar on
the screen, start on one side
(left or right). Make sure that
the clip profile starts against
the plastic end cap at the
start.
5
click
Now slide up from one side
to the other.