Maintenance And Care - Stihl FSE 60 Gebrauchsanleitung

18 Maintenance and Care

17.4.3 Winding line onto spool
3
3
5
► Use green-coded nylon line with a diameter of
2 mm (0.08 in).
► Cut two 2 m (6ft 6in) lengths of nylon line from
the reel (special accessory).
► Rotate the spool (2) counterclockwise until the
two arrow points are in alignment.
► Push the straight end of each line through one
of the sleeves (5) in the mowing head (3) until
18 Maintenance and Care
The following intervals apply to normal operating conditions
only. If your daily working time is longer or operating conditions
are difficult (very dusty work area, etc.), shorten the specified
intervals accordingly.
Complete machine
Power cord
Switch, starting lockout
Cooling inlets
All accessible screws and nuts Retighten
1)
STIHL recommends a STIHL servicing dealer.
0458-282-9821-C
2
Visual inspection (condition)
Clean
Check
Have replaced by dealer
Check operation
Have replaced by dealer
Clean
you feel a noticeable resistance – and then
continue pushing as far as stop.
► Hold the mowing head steady.
► Rotate the spool counterclockwise until the
shortest line is about 10 cm (4 in).
► If necessary, cut the longer line to a length of
about 10 cm (4 in).
The mowing head is now full.
X
X
X
1)
X
1)
X
English
X
X X
X
33