Storage; Transport; Disposal And Recycling - Scheppach Special Edition HL 1400 Originalbetriebsanleitung

Open the release screw B, so that the oil can run out.
Close the release screw again and tighten it well.
Using a funnel, fill new hydraulic oil into the container.
Check the oil level by using the oil dipstick. The oil level
must be between the highest and lowest mark.
Screw the venting hatch on again.
Dispose of the used oil in a correct manner at a public
collection facility. It is prohibited to drop old oil on the
ground or to mix it with waste.
We recommend the following hydraulic oils:
Aral Vitam gf 22
BP Energol HLP-HM 22
Mobil DTE 11
Shell Tellus 22
or oils of same quality.
Do not use any other types of oil as they would
influence the function of the hydraulic cylinder.
Hydraulic system
The hydraulic unit is a closed system with oil tank, oil
pump and control valve.
The system is complete when the machine is delivered,
and may not be changed or manipulated.
Regularly check the oil level.
Too low an oil level damages the oil pump.
Regularly check the hydraulic connections and bolts for
tightness. Retighten if necessary.
Before undertaking any maintenance or checking work,
the working area must be cleaned. Keep the necessary
tools within the reach of your hand.
The intervals mentioned herein are based on normal
conditions of use. An excessive use of the machine
shortens the intervals accordingly.
Clean the panels, screens and control levers with a soft
cloth. The cloth should be dry or slightly humid with a
neutral cleaning agent. Do not use any solvents like
alcohol or benzene as they could damage the surfaces.
Store oil and grease outside the reach of unauthorized
personnel. Strictly follow the instructions on the bins.
Avoid direct contact with the skin. Rinse well after use.

11. Storage

Store the device in a dry place beyond the reach of
children.
When the device is not being used, store it so it cannot
be started by unauthorised persons.
WARNING!
Do not store the device without protection outside or in
a damp environment.
Storing conditions:
The following conditions are required:
• Dry storing place under roof
• Maximum humidity 80 %
• Temperature range -20 °C to +60 °C
Winterising
Clean the appliance thoroughly.
Keep the appliance in a dry room.
Provide overall servicing as described in the Servicing
section.
Clean the appliance external surface.
25 GB
All manuals and user guides at all-guides.com

12. Transport

Transport by hand, Fig. 3
For transport, the splitting knife A must be completely
moved down. Slightly tilt the log splitter with handle B
on the splitting column until the machine is inclined on
the wheels and can be moved.
Transport by crane:
Never lift the machine on the splitting knife!

13. Disposal and recycling

The disposal instructions are based on icons placed
on the appliance or its package. The description of the
meanings can be found in the "Marking" section.
Transport package disposal
The package protects the appliance against damage
during transport. Packing materials are usually chosen
depending on their environmental friendliness and
disposal method and can therefore be recycled.
Returning the package to material circulation saves raw
materials and reduces waste disposal costs. Parts of
packages (e.g. foils, styropor®) can be dangerous to
children.Risk of suffocation!
Keep parts of packages away from children and
dispose them as soon as possible.
Dismounting and disposal
The machine does not include any components harmful
to health or environment. All the materials can be
recycled or decomposed the normal way.
Charge specialized personnel with the disposal that
is familiar with the possible risks and with the present
manual.
When the machine is not used any more and is to be
disposed of, proceed as follows:
Cut off the electric power supply.
Remove all electric cables and bring them to a
specialized public collection facility following your
country's regulations.
Empty the oil tank, fill the oil in a tight bin and bring it
to a specialized public collection facility following your
country's regulations.
Take all other machine parts to a scrap collection
facility following your country's regulations.
Be sure every machine part is disposed of following
your country's regulations.