Electromagnetic Emissions - Medela Thopaz+ Gebrauchsanweisung

Electromagnetic compatibility
(EMC, IEC 60601-1-2:2007 3rd Edition and IEC 60601-1-2:2014 4th Edition, Table 1)

Electromagnetic emissions

Thopaz + is intended for use in the electromagnetic environment specified below�
The customer or the user of Thopaz + should assure that they are used in such
an environment�
Emission Tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
WARNINGS
Thopaz + should not be used adjacent to or stacked with other equipment� If adjacent or
stacked use is necessary, Thopaz + should be observed to verify normal operation in the
configuration in which it will be used�
412 |
Technical documentation
Compliance Electromagnetic environment – guidance
Thopaz + uses RF energy only for its internal
Group 1
function� Therefore, its RF emissions are very low
and are not likely to cause any interference with
nearby electronic equipment�
Thopaz + is suitable for use in all establishments,
Class B
including domestic establishments and those
directly connected to the public low-voltage power
Class A supply network that supplies buildings used for
domestic purposes�
Complies