Reset Fluid Display - Medela Thopaz+ Gebrauchsanweisung

7�6�2

Reset fluid display

30 |
Preparation for use/operating instructions
For an individual fluid management an additional fluid
parameter can be set to zero at any given time�
1�
2�
1�1 Press [ ] for longer than
3 seconds�
2�1 The timer on the left side is
giving you the time when
the parameter was set to
zero (in this case 12 minutes
ago)� The fluid amount on
the right side is giving you
the drained fluid volume (in
this case 50 ml got drained
in the last 12 minutes)� To
reset the timer and fluid
again press [ ] for longer
than 3 seconds�