Dismantling The Keramott Protection And Fitting The Deflector Plate; 65X - 75X; 55X55X); Fitting The Deflector Plates (All Other Models) - Austroflamm 65x Montagehandbuch

EN
1.9

Dismantling the Keramott protection and fitting the deflector plate

65x - 75x; 55x55x)

Open the doors
Remove the transport bracket
1.10
Fitting the deflector plates
The Keramott elements of the fireplace are pre-assembled. Only the Keramott deflectors still have to be fitted:
First, insert the two upper
deflector plates. These
should be fitted without any
gaps between them.
Then insert the two lower
plates as illustrated.
FIREPLACE INSERTS / SLIDING DOOR
Loosen the screws (2x)
Insert the deflector plate
(all other models)
75x39/51 SII
7
www.austroflamm.com
english
7