Operating The Stove Using The Ir Remote Control; Operating The Stove Using The App And Smart Phone - Austroflamm Mo Duo Benutzerhandbuch

EN
Short press
By briefly pressing the control knob,
you can switch between the 'Heat
output' and 'Room temperature'
screen views.
If the control knob is pressed in one of the setting menus or during display-idle mode, the display always
switches to the 'Room temperature' display.
Long press
A long press of the control knob will
cause a countdown to appear after
the stove is turned
ON or OFF
Turning the control knob
By turning the control knob,
depending on the selected
display view, the required
target temperature or the
heat output of your stove
can be set.
3.3.

Operating the stove using the IR remote control

Your stove is supplied with an IR remote control, which can be used for the functions below. The following func-
tions are available to you using this control:
Power level - +
Set temperature - +
Ensure "visual contact" between the remote control and the control panel.
3.4.

Operating the stove using the APP and smart phone

To install or set up the data connection, please refer to the instruc-
tions for your WLAN module, or follow the installation instructions
of the Austroflamm PelletControl app.
Download the required "Austroflamm PelletControl" app here and
then start it:
Apple iOS Google Play / Android
13
.
On / Off
CLOU DUO, MO DUO
english
www.austroflamm.com 13