flamco meibes MeiTronic LFC Montage- Und Bedienungsanleitung Seite 42

Gateway
Please refer to the router configuration for the gateway to be set.
DNS-Server
Please refer to the router configuration for the DNS server to be set.
Datalogger Version
Shows the software version of the datalogger.
CAN bus ID
Here you can see the ID of the controller on the CAN bus.
Sensor send interval
The send interval determines how often the sensor and output values of the controller may be sent via CAN. If a value changes, it
will be sent and will starts the interval. The next values are not sent until the interval has ended . If no value changes, nothing will
be sent.
If there are several controllers in the CAN network, a too short send interval may lead to an overload of the CAN net-
work.
18