Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions; Eu-Conformity; General Instructions; Explanation Of Symbols - flamco meibes MeiTronic LFC Montage- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Safety Instructions

EU-Conformity

By affixing the CE mark to the unit the manufacturer declares that the MeiTronic LFC conforms to the following relevant safety reg-
ulations:
EU low voltage directive 2014/35/EU
l
EU electromagnetic compatibility directive 2014/30/EU
l
Conformity has been verified and the corresponding documentation and the EU declaration of conformity are kept on file by the
manufacturer.

General Instructions

Please read carefully!
These installation and operating instructions contain basic instructions and important information regarding safety, installation,
commissioning, maintenance and the optimal use of the unit. Thus, the installation technician/specialist and the system user must
read and fully understand these instructions prior to installation, commissioning and operation of the unit.
The device is an automatic, electric controller . Only install the device in dry rooms and under environmental conditions as
described in 'Technical Data'.
The applicable accident prevention regulations, VDE regulations, the regulations of the local energy provider, the applicable
DIN-EN standards and the installation and operating instructions of any additional system components must also be observed.
Under no circumstances does the unit replace any safety devices to be provided by the customer!
Installation, electrical connection, commissioning and maintenance of the device may only be carried out by an appropriately
trained specialist. Users: Make sure that the specialist gives you detailed information on the functionality and operation of the
unit. Always keep these instructions in the vicinity of the unit.
The manufacturer assumes no liability for damage caused by improper use or non-compliance with this manual!

Explanation of Symbols

Failure to comply with these instructions may result in danger of death by exposure to electrical voltage.
Danger Electricity
Failure to comply with these instructions may result in severe injuries, such as scalding, which may carry the
danger of death.
Danger
Failure to observe these instructions may result in destruction of the unit or the system, or environmental dam-
age.
Caution
Information which is especially important to the function and optimal use of the unit and the system.
Caution
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis