Times; Time & Date; Daylight Saving Time; Heating Circuit (Day) - flamco meibes MeiTronic LFC Montage- Und Bedienungsanleitung

3. Times

Time & Date
This serve to set the current time and date.
For system data statistics, it is essential for the time to be set accurately on the controller. Please note that the clock
will continue to run for about 24 hours, if the mains voltage is interrupted, and it must be reset afterwards. Improper
operation or an incorrect time may result in data being deleted, recorded incorrectly or overwritten. The manufacturer
accepts no liability for the recorded data!

Daylight Saving Time

If this function is activated, the controller will automatically changes to winter time or summer time (DST, Daylight Savings Time).

Heating Circuit (Day)

This menu is used to select the daytime mode times for the heating circuit; three time periods can be specified for each weekday
and copied to the following days.
Unspecified times are automatically considered to be night-time mode. The set times are only taken into account in the
'Automatic' heating circuit operating mode.
Settings for time, date and operating times for the heating circuit.
The associated temperature reference values are
specified in Menu 5, 'Settings'.
13