About The Controller; Scope Of Supply; Hydraulic Variants - flamco meibes MeiTronic LFC Montage- Und Bedienungsanleitung

About the Controller

The controller MeiTronic LFC facilitates efficient use and function control of your Pump Group MeiFlow LFC (MC/UC) while its
handling is intuitive. After every input step the suitable functions are matched to the keys and explained in a text above. In the
menu 'Measurements and Settings', help text and graphics in addition to key words are available.
The MeiTronic LFC can be used for the different system variants.
Important characteristics of the MeiTronic LFC are:
Presentation of graphics and texts using a lit display.
l
Simple viewing of the current measurement values.
l
Statistics and system monitoring by means of statistical graphics.
l
Extensive menus with explanations.
l
A menu block can be activated to prevent unintentional setting changes.
l
Resetting to previously selected values or factory settings.
l

Scope of Supply

Controller MeiTronic LFC
l
3 screws 3.5 x 35 mm and 3 6 mm plugs for wall installation.
l
MeiTronic LFC Installation and operating instructions
l

Hydraulic Variants

The following illustrations should be regarded only as schematic representations of the respective hydraulic systems
and are in no way intended to be complete. Under no circumstances should the controller replace any safety devices.
Depending on the specific application, additional system and safety components such as check valves, non-return
valves, safety temperature limiters, scalding protectors, etc., may be required and thus, to be installed.
S1 Temperature sensor (Flow)
S2 Temperature sensor (Return flow)
S4 Temperature sensor (Outdoor)
S5 Differential pressure sensor
6
S1 Temperature sensor (Flow)
S2 Temperature sensor (Return flow)
S4 Temperature sensor (Outdoor)
S5 Differential pressure sensor