Ukca Declaration Of Conformity; General Power Tool Safety Warnings; Work Area Safety - Stihl TSA 230 Gebrauchsanleitung

English
the versions of the following standards valid at
the production date:
EN 55014‑1, EN 55014‑2, EN 60745‑1,
EN 60745‑2‑22
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Produktzulassung
The year of construction, the country of manufac‐
ture and the machine number are shown on the
machine.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
26 UKCA Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation:
Make:
Series:
Serial identification num‐
ber:
complies with the relevant provisions of the UK
regulations Supply of Machinery (Safety) Regula‐
tions 2008, Electromagnetic Compatibility Regu‐
lations 2016 and The Restriction of the Use of
Certain Hazardous Substances in Electrical and
Electronic Regulations 2012 and has been
developed and manufactured in accordance with
the versions of the following standards valid on
the date of manufacture:
EN 55014‑1, EN 55014‑2, EN 60745‑1,
EN 60745‑2‑22
60
Cordless cut-off
machines
STIHL
TSA 230
4864

26 UKCA Declaration of Conformity

Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
The year of construction, the country of manufac‐
ture and the machine number are shown on the
machine.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
27 General Power Tool Safety
Warnings
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the EN 60745
European standard for hand-held motor-oper‐
ated electric tools. STIHL is required by law to
print these standardized texts verbatim.
The safety precautions and warnings on avoiding
an electric shock given under "2) Electric Pre‐
cautions" do not apply to STIHL cordless electric
power tools
WARNING
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref‐
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat‐
tery-operated (cordless) power tool.
27.1

1) Work area safety

a)Keep work area clean and well lit. Cluttered or
dark areas invite accidents.b)Do not operate
power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.c)Keep children and bystanders
0458-707-9621-B